Products

 

A Tradition of Quality, Girton Food Division

Girton Manufacturing Co., Inc. manufactures a broad line of stainless steel washing systems for the Food Industry.

Our product line includes, but is not limited to, Conveyorized Tunnel, Cabinet, Case and Drum Washers as well as Indexing Bin and Tote Washing Systems; COP Tanks, Pallet Washers and Rotary Brush Washers.

  • All equipment is designed, fabricated and tested in our facility located in Millville, PA before it is shipped.
  • Advanced solutions for a demanding world.

After more than 80 years since Paul Girton founded the company, Girton still uses his same philosophy, “Service an industry by tailoring equipment to meet the specific customer’s needs”.

 

CABINET WASHERS

Cabinet Washer 794AH

Click to Download Technical Specification (pdf)

The washer will be a Girton Model 794AH Clean Out-of-Place Pressure Washer constructed of stainless steel, utilizing a reciprocating header spray system. The spray header is suspended from a carriage riding on an overhead track. The operating cycle is entirely automatic with each stage of operation under micro-processor control at all times.

Purpose of System:

  • To ensure the adequate cleaning and rinsing of product contact surfaces.
  • The following items can be washed, rinsed and sanitized in the washer:
  • Scale Hoppers and Troughs
  • Small Drums Or Totes
  • Buckets, Tubs Or Trays
  • Other Various Items

Cabinet Washer 80-O

Click to Download Technical Specification (pdf)

The 80-O is a heavy duty, large capacity hydrospray washer designed for thorough, efficient cleaning of tubs, trees, carts and other miscellaneous items used in the Food Industry.

 

CANDY MOLD WASHER

Candy Mould Washer CTX

Click to Download Technical Specification (pdf)

The Girton Model CTX Candy Mould Washer is a conveyorized tunnel style washer to wash and rinse plastic candy molds. The system can be designed with two or more lanes or slots to accommodate molds in an on-edge position with the molds being inserted into the slots in a lengthwise manner. A heated blow-off and a cooling section can be added.

 

CAN RINSER / STERILIZER

Can Rinser-Sterilizer CR10SS

Click to Download Technical Specification (pdf)

Construction:

Girton Can Rinser-Sterilizers are ruggedly constructed with heavy gauge, stainless steel and are equipped with 3/4″ NPT solid bronze valves. Water and steam connections can be made to either valve. Bases are drilled for easy bolting to the floor. The rinse basin is fabricated of stainless steel plate and tubing, designed with round bottom for strength and minimum water requirements. All seams are electrically welded and ground smooth. The standard basin is 12”.

Operation:

A Girton Can Rinser-Sterilizer provides three separate cleaning treatments. With a can inverted over the basin shaped top, simply depressing the right pedal gives you a cold-water pressure pre-rinse. By stepping on both pedals together, you get a hot water wash-rinse, and use of the left pedal alone gives you steam sterilization. The big specially perforated nozzle directs a hard spray against the full inside surfaces of the can. Foot pedal operation leaves the operator’s hands free to handle the cans.

 

CONTAINER WASHER

Container Washer GC

Click to Download Technical Specification (pdf)

Girton Container Washer, designed to wash and rinse Plastic Dairy or Soft Drink Containers.

Container Washer

Click to Download Technical Specification (pdf)

The Girton Container Washer, designed to wash Plastic or Metal Containers and Lids at the nominal rate of 2-3 per minute.

 

COOP WASHER

Coop Washer

Click to Download Technical Specification (pdf)

Girton Coop Washer shall wash and rinse plastic and wooden coops up to 34″ x 24″ x 11″ high.

 

DRUM WASHER

Drum Washer GC24DW

Click to Download Technical Specification (pdf)

Girton Model GC24DW Drum Washer to wash and rinse plastic or metal containers, as large as 24″ diameter x 38″ high, at the variable rate of 60 to 180 per hour.

 

ELEVATOR BUCKET WASHER

Elevator Bucket Washer GC20EB

Click to Download Technical Specification (pdf)

Girton Model GC20EB Elevator Bucket Washer, designed to wash and rinse elevator buckets at the nominal rate of 6 per minute, or 360 per hour.

 

HARVESTING CRATE WASHER

Harvesting Crate Washer

Click to Download Technical Specification (pdf)

Girton Harvesting Crate Washer, designed to wash and rinse Plastic Harvesting Crates from 4 to 12 per minute.

 

PALLET WASHER

Vertical Pallet Washer CW10PS

Click to Download Technical Specification (pdf)

Girton CW-10PS Pallet Washer to wash and rinse plastic and wooden pallets up to 48″ x 48″ x 7-1/2″ high at the rate of 60 to 180 per hour.

Horizontal Pallet Washer GC20HP

Click to Download Technical Specification (pdf)

Girton Model GC20HP Horizontal Pallet Washer, designed to wash and rinse Plastic or Fiberglass Pallets at the variable rate of 60-120 per hour.

 

TOTE BIN WASHER

GCWHX Indexing Tote Bin Washer

Click to Download Technical Specification (pdf)

Girton Model GCWHX Tote Bin Washer to prewash and rinse metal bins, as large as 41” diameter x 69” high, at the variable rate of 28 bins per hour. (Note: Lids to be hung on side of bin with removable hook.)

 

LUG WASHER / V MAG WASHER

Lug/V Mag Washer GCWHV

Click to Download Technical Specification (pdf)

Girton Model GCWHV Washer to wash and rinse plastic or metal bins, as large as 28” x 28” x 40” deep, at the variable rate of 20-30 bins per hour.

 

INDEXING TUNNEL WASHER

Indexing Tunnel Washer GCWH-BT

Click to Download Technical Specification (pdf)

Girton Model GCWH-BT Washer to wash and rinse plastic or metal bins, as large as 48” x 48” x 48” deep, at the variable rate of 20-30 bins per hour.

 

COP TANK

COP Tank

Click to Download Technical Specification (pdf)

Girton Pump-Masters are designed to wash various pipes, parts, and fittings used in many industries.

The Industry Leader Since 1927

A tradition of Quality, Girton Laboratory Animal Care Division

Girton Manufacturing Co., Inc. manufactures a broad line of stainless steel washing systems for the Laboratory Animal Care Industry. Our product line includes a full line of washers for cages, racks, carts, bottles, utensils, and miscellaneous items used in the care of laboratory animals.

  • Bedding Dispensers, Bottle Fillers, Cage, Pan and Bottle Washing Racks compliment our washer lineup.
  • All equipment is designed, fabricated and tested in our facility located in Millville, PA before it is shipped.
  • Girton’s Engineers work closely with your Designers when planning new or upgraded facilities.
  • Advanced solutions for a demanding world.

After more than 80 years since Paul Girton founded the company, Girton still uses his same philosophy, “Service an industry by tailoring equipment to meet the specific customer’s needs”.

 

BOTTLE FILLERS

BF64 Bottle Filler

Click to Download Technical Specification (pdf)

Case Type Filler for laboratory animal watering bottles. Standard header has jet spacing to fill 8 oz. or 16 oz. Girton bottles in the standard Girton bottle cases. Interchangeable header is available with jet spacing for the Girton 32 oz. bottle and case. Headers with jet spacing for all industry standard bottle cases are available. Consult factory.

BF65 Bottle Filler

Click to Download Technical Specification (pdf)

Manifold header for filling one (1) case of bottles at a time, tabletop mounted, adjustable timer for controlling filling time. Slides are provided under the table for case storage.

Airmaster

Click to Download Technical Specification (pdf)

Girton ‘1-Compartment’ Airmaster Washers are ideal for washing miscellaneous small parts, small cages and covers, and large quantities of sipper tubes and rubber stoppers.

 

BEDDING DISPENSERS

BD96 Semi-Automatic Bedding Dispenser

Click to Download Technical Specification (pdf)

The Bedding Dispenser is a completely packaged unit complete with all wiring for single service connection. It is designed to accurately dispense varying but uniform amounts of bedding into two animal cages at one time as they are manually placed under the dispensing ports. The bedding dispenser shall handle all the various forms of bedding used in today’s Animal Care Industry. This bedding dispenser has been designed to eliminate the jamming, clogging, bridging, and non-conveyance of ultra-light bedding materials, problems commonly associated with other semi-automatic bedding dispensers.

BD80 Automatic Bedding Dispenser

Click to Download Technical Specification (pdf)

Girton pioneered this dispenser in 1979, and introduced it to the market place in 1980, hence BD80. The bedding transfer system consists of stainless steel “flights” attached to commercial-grade hardened steel chain links, which were sourced to cure the problem of pinching, link wear, jumping off drive sprockets, jamming, etc., associated with other types of chain. These links are not available in stainless steel material.

  • All other components of the BD80 are fabricated of stainless steel material.
  • The Girton BD80 Bedding Dispenser is designed to prevent water from entering the bedding dispenser at the load end of the unit. Cleanouts, debris pans, screens, etc. are provided where appropriate.
  • The Bedding Dispenser shall be a completely packaged unit complete with all wiring for single service connections.
  • The bedding dispenser shall be designed to accurately dispense varying amounts of bedding into animal cages as they are conveyed through the bedding dispenser in random fashion. The bedding dispenser shall handle various forms of solid bedding as used in the Animal Care Industry.

 

TUNNEL DRYER

GDTD Tunnel Dryer

Click to Download Technical Specification (pdf)

The tunnel dryer shall be a fully automatic tunnel-conveyor type unit, designed to process plastic and metal animal cages, cage pans, feeders, lids, accessory equipment, and watering bottles in cases. Animal cages and pans shall be dried in order to accept clean, dry animal bedding, if required.

 

CABINET WASHER

794A Cabinet Washer

Click to Download Technical Specification (pdf)

The washer shall be a Girton Model 794A Cabinet Type Pressure Washer constructed of type-304 stainless steel, utilizing a reciprocating header spray system. The spray header is suspended from a carriage riding on an overhead track. The operating cycle is entirely automatic with each stage of operation under microprocessor control at all times.

Purpose of System:

To ensure the adequate cleaning and rinsing of bottles, utensils, cages, etc.

 

INSULATED WALL

Insulated Wall

Click to Download Technical Specification (pdf)

The installation shall include an insulated stainless steel wall at the discharge (Clean) and/or in-feed (Dirty) end of the cage/rack washer or tunnel washer, as shown on the drawings. The wall shall consist of a #4 polish exterior, 2” rigid foam insulation, and a 2B or polished interior (side visible from mechanical area). Appropriate fasteners, angles, clips and trim pieces are included.

The wall shall extend from the finished floor to a maximum of 6” above the finished ceiling. (8’ to 10’ ceiling height is common.) The finished ceiling should be installed after the wall is in place, for best results. Appropriately sized openings in the walls allow for installation after the washers have been set-in-place. Each washer features a trim flange to seal off the small remaining opening, for an aesthetically pleasing appearance. Stainless steel doors, windows, speaking ports, louvers, etc. will be provided as described in the project scope and shown on the drawings. The exact configuration of the wall will be determined by the final floor plan design, produced by the architect and planners.

 

BOTTLE WASHER

BW95 Feeder Bottle Washer

Click to Download Technical Specification (pdf)

The BW95 Feeder Bottle Washer is a heavy duty, cabinet type hydro-spray washer designed for thorough, efficient cleaning of feeder bottles used in the care of laboratory animals.

 

RACK AND CAGE WASHER

80-O Rack and Cage Washer

Click to Download Technical Specification (pdf)

The 80-0 is a heavy duty, large capacity hydrospray washer designed for thorough, efficient cleaning of cages, racks, debris pans and miscellaneous items used in the care of laboratory animals.

 

BEDDING DUMP HOPPER

BDS2 Bedding Dump Hopper

Click to Download Technical Specification (pdf)

The bedding dump hopper shall be designed for operation by one or two persons, for ‘Bump and Dump’ cleaning of several hundred plastic animal cages per hour.

The bedding dump hopper shall consist of a stainless steel tubular framework, stainless steel sheet metal back splash, tabletop (with opening for two (2) refuse containers supplied by others), and stainless steel grid work positioned above the tabletop as the primary work surface.

In practice, as the operators bump the soiled animal cages on to the heavy-duty stainless steel grid work, the soiled bedding shall fall through cutouts in the tabletop and into the refuse containers. (Plastic 30-gallon garbage cans, with plastic liners, are commonly used for this purpose. There shall be ample clearance underneath the tabletop for cans mounted on casters for easy mobility.)

The height of the grid work shall be adjusted to match the Tunnel Washer conveyor height, making it easy to slide the plastic animal cages onto the tunnel washer in-feed deck. The BDS2 bedding dump hopper may be wheeled into a Rack and Cage Washer for thorough, automatic clean up. The grid shall be removable for complete access to all surfaces for intensive regular clean up.

 

TUNNEL WASHER

CTTW Tunnel Washer

Click to Download Technical Specification (pdf)

The Girton Tunnel Washer is a heavy duty, conveyorized, hydro-spray washer designed for thorough, efficient cleaning of cages, debris pans, bottles, feeder bowls, and miscellaneous items used in the care of laboratory animals.

GTW Tunnel Washer

Click to Download Technical Specification (pdf)

The Girton Tunnel Washer is a heavy duty, conveyorized, hydrospray washer designed for thorough, efficient cleaning of cages, debris pans, bottles, feeder bowls, and miscellaneous items used in the care of laboratory animals.

 

ROLLER CONVEYOR

RCCVR Roller Conveyor

Click to Download Technical Specification (pdf)

The Roller Conveyor may be located at either end of a Tunnel Washer, to accumulate items before or after they have been washed. The Roller Conveyor may be optionally equipped with an automatic conveyor shut off switch, which will stop the operation of the Tunnel Washer Conveyor when items reach the end of the conveyor, indicating the system is fully loaded.

The Industry Leader Since 1927

A Tradition of Quality, Girton Pharmaceutical Industry

Girton Manufacturing Co., Inc. manufactures a broad line of stainless steel washing systems for the Pharmaceutical Industry.

Our product line includes, but is not limited to, Conveyorized Tunnel, Cabinet, Glassware, Drum Washers as well as Bin and Tote Washing Systems; COP Tanks, Pallet Washers, Exterior Vial Washers, Personnel Decontamination Showers and Wall Mounted Interior Tote Washers.

  • All equipment is designed, fabricated and tested in our facility located in Millville, PA before it is shipped.
  • After more than 80 years since Paul Girton founded the company, Girton still uses his same philosophy,
  • Service an industry by tailoring equipment to meet the specific customer’s needs”.
  • Advanced solutions for a demanding world.We encourage you now to peruse our equipment selection list and fill out the inquiry form for a prompt reply.

 

TUNNEL WASHER

CTTW Tunnel Washer

Click to Download Technical Specification (pdf)

The Girton Tunnel Washer is a heavy duty, conveyorized, hydro-spray washer designed for thorough, efficient cleaning.

 

VIAL EXTERIOR WASHER / DRYER

GV150S Vial Exterior Washer/Dryer

Click to Download Technical Specification (pdf)

The washer shall be a completely package tunnel washer type unit with all piping and electrical wiring for single service connections. The machine is designed to wash liquids and hygroscopic dust from the exteriors of filled and closed glass vials.

 

PORTABLE WASHER

BW05 Portable Washer

Click to Download Technical Specification (pdf)

This system is a portable, self-contained washing unit mounted on casters to enable it to be easily moved from blender to blender. The operating cycle is entirely automatic with each stage of operation under PLC control at all times.

 

CABINET WASHER 

072 Cabinet Washer

Click to Download Technical Specification (pdf)

A Girton Model 072 Cabinet Washer is constructed of stainless steel and utilizes a rotating header spray system. The operating cycle is entirely automatic. A PLC controls each stage of the operation.

944 Cabinet Washer

Click to Download Technical Specification (pdf)

The 944 is a capacity hydro-spray washer designed for thorough, efficient cleaning of glassware, machine parts, drums and other miscellaneous items used in the Pharmaceutical Industry.

80-O Cabinet Washer

Click to Download Technical Specification (pdf)

The 80-O is a heavy duty, large capacity hydrospray washer designed for thorough, efficient cleaning of totes, IBC’s, drums and other miscellaneous items used in the Pharmaceutical Industry.

 

PERSONAL DECONTAMINATION SHOWER 

PW87 Personnel Decontamination Shower

Click to Download Technical Specification (pdf)

Personnel decontamination showers shall remove all detectable contaminate from a single, suited occupant. Showers shall be safe reliable and capable of repeating shower cycles several times. All showers shall be operationally tested prior to shipment.

 

CONTAINER RINSER

CR10 Container Rinser

Click to Download Technical Specification (pdf)

The rinser shall be completely packaged with all piping and electrical wiring for single service connections. The machine is designed to rinse the interior of various containers.

 

PALLET WASHER

CW10PS Pallet Washer

Click to Download Technical Specification (pdf)

Girton CW-10PS Pallet Washer to wash and rinse plastic pallets up to 48″ x 48″ x 7-1/2″ high at the rate of 60 to 180 per hour.

 

PUMP-MASTER

Pump-Master

Click to Download Technical Specification (pdf)

Girton Pump-Masters are designed to wash various pipes, parts, and fittings used in many industries.

 

WALL MOUNTED IBC WASHER

Wall Mounted IBC Washer WMIW

Click to Download Technical Specification (pdf)

Girton Pump-Masters are designed to wash various pipes, parts, and fittings used in many industries.

Over 275 Models to Choose From

Manufacturer of stainless steel thermal energy storage equipment for Food Processing and Air Conditioning Industries. Equipment produced is used for efficient, low cost, accurately controlled cooling of products or air. Packaged direct expansion refrigeration systems are available. This list is far from being complete because Girton’s capabilities allow machines to be developed to meet most any need.

Girton King Zeero Ice Builder Cabinets are used with either direct expansion refrigerants or full flooded ammonia. We have ice storage capacities from 500 Lbs. to over 100,000 Lbs. The same basic design has been used since 1929, with no moving parts. With the original patented design, which uses no auxiliary air, or propeller agitation the King Zeero provides you with the most energy and cost effective system available today.

  • This King Zeero Cabinets are made of stainless steel both inside and out. The use of pipe as coils and plate tank construction insures longevity over the competition that uses tubing as coils and sheet steel for tank walls.
  • The units come complete ready to connect to water, electric and refrigeration lines. The Girton Ice Builder Cabinet can be installed inside or outside.
  • Package units are available which includes the ice builder, with refrigeration packages mounted, wired, charges and test run prior to shipment.

We encourage you to visit the King Zeero selection pages for a brief listing of sizes and opportunities.

 

KING ZEERO ICE BUILDER

King Zeero Ice Builder

Click to Download Technical Specification (pdf)

Girton King Zeero Ice Builder Cabinet with a capacity from 500 lbs. to over 100,000 lbs. of ice at 2-1/2″ thick.

 

E SERIES KING ZEERO ICE BUILDER

E Series King Zeero Ice Builder

Click to Download Technical Specification (pdf)

Girton King Zeero Ice Builder with a capacity from 3,145 to over 80,000 Lbs.